No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp client request option-list

dhcp client request option-list

Function

The dhcp client request option-list command configures a list of request options that the Option55 field in DHCP Request packets carries besides the default options.

The undo dhcp client request option-list command deletes a list of request options that the Option55 field in DHCP Request packets carries besides the default options.

By default, the Option55 field in DHCP Request packets carries request options 3, 6, 15, 28, 33, 44, 121, and 184 by default.

Format

dhcp client request option-list option-code &<1-9>

undo dhcp client request option-list option-code &<1-9>

Parameters

Parameter

Description

Value

option-code

Specifies a list of request options that the Option55 field carries besides the default options.

The value is of enumerated type and can be 4, 7, 17, 42, 43, 66, 67, 120, and 129.

Views

VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

The Option55 field in DHCP Request packets is used to set the request option list. DHCP clients use this option to specify network configuration parameters that need to be obtained from the DHCP server. By default, the Option55 field carries request options 3, 6, 15, 28, 33, 44, 121, and 184 by default. Besides the default options, you can run the dhcp client request option-list option-code command to set a list of other request options that the Option55 field carries.

For option meanings, see DHCP Options in CLI-based Configuration - Network Interconnection Configuration Guide - DHCP Configuration.

Example

# Configure the Option55 field in DHCP Request packets to carry option 4 on VLANIF100.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] dhcp client request option-list 4
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196795

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next