No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ip route-static selection-rule relay-depth

ip route-static selection-rule relay-depth

Function

The ip route-static selection-rule relay-depth command enables static routes to be selected based on the iteration depth.

The undo ip route-static selection-rule relay-depth command disables static routes from being selected based on the iteration depth.

By default, static routes are not selected based on the iteration depth.

Format

ip route-static selection-rule relay-depth

undo ip route-static selection-rule relay-depth

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To prevent a loop when GGSN services are forwarded between boards, use the ip route-static selection-rule relay-depth command to enable static routes to be selected based on the iteration depth.

Precautions

In the system, some static routes have the same prefix and preference but different iteration depths. After the system enables static routes to be selected based on the iteration depth, the static route module selects the static route with the smallest iteration depth as the active route and delivers it to the FIB table. Other static routes then become inactive.

Example

# Enable static routes to be selected based on the iteration depth.

<Huawei> system-view
[Huawei] ip route-static selection-rule relay-depth
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195616

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next