No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
scan-channel-set

scan-channel-set

Function

The scan-channel-set command configures an air scan channel set.

The undo scan-channel-set command restores the default air scan channel set.

By default, an air scan channel set contains all channels supported by the country code of an AP.

Format

scan-channel-set { country-channel | dca-channel | work-channel }

undo scan-channel-set

Parameters

Parameter

Description

Value

country-channel

Specifies an air scan channel set that contains all channels supported by the country code of an AP.

-

dca-channel

Specifies a calibration channel set as the air scan channel set. To configure a calibration channel set, run the dca-channel channel-set command.

-

work-channel

Specifies an air scan channel set that contains working channels of APs.

-

Views

Air scan profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After you run the scan-channel-set command to specify an air scan channel set for an AP, the AP scans channels in the channel set. The collected information is reported to the server for radio calibration, smart roaming, terminal location, or WIDS data analysis.

Precautions

  • If the air scan channel set you specified contains all channels supported by the country code of the AP, the AP scans data on many channels but the channel scanning lasts for a long time, which may affect real-time data analysis.
  • If you specify a calibration channel set as the air scan channel set, the AP scans data on a few channels. This reduces the channel scanning time, increases the terminal location accuracy, and reduces burden on the device.
  • If you add only working channels of an AP to the air scan channel set, the AP only scans the working channels.

Example

# Configure an air scan channel set that contains all calibration channels.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] air-scan-profile name huawei
[Huawei-wlan-air-scan-prof-huawei] scan-channel-set dca-channel
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199102

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next