No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
probe-response-retry

probe-response-retry

Function

The probe-response-retry command sets the number of times Probe Response packets are retransmitted.

The undo probe-response-retry command restores the default number of times Probe Response packets are retransmitted.

By default, the number of Probe Response retransmissions is 1.

Format

probe-response-retry retry-time

undo probe-response-retry

Parameters

Parameter Description Value
retry-time Specifies the number of times Probe Response packets are retransmitted.

The value is an integer that ranges from 0 to 3.

When the value is set to 0, Probe Response packets are not retransmitted.

Views

SSID profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

In high-density wireless scenarios, too many Probe Response frames occupy a large number of wireless resources. To reduce wireless resource occupation of the frames, you can run the probe-response-retry command to set a small number of or forbid Probe Response packet retransmissions.

Precautions

A small number of Probe Response packet retransmissions may reduce the channel scan efficiency of some STAs while a large number of Probe Response packet retransmissions may lower the wireless network performance.

Example

# Set the number of times Probe Response packets are retransmitted to 0.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ssid-profile name ssid1
[Huawei-wlan-ssid-prof-ssid1] probe-response-retry 0
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203760

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next