No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize unicast-suppression

traffic-optimize unicast-suppression

Function

The traffic-optimize unicast-suppression command sets the maximum traffic volume of unknown unicast packets in a traffic profile.

The undo traffic-optimize unicast-suppression command cancels the limit on the maximum traffic volume of unknown unicast packets in a traffic profile.

By default, unknown unicast packets are not suppressed in a traffic profile.

Format

traffic-optimize unicast-suppression packets packets-rate

undo traffic-optimize unicast-suppression

Parameters

Parameter

Description

Value

packets packets-rate

Specifies the number of packets transmitted per second.

The value ranges from 0 to 14881000, in pps.

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

When a large number of unknown unicast packets are transmitted on a network, a lot of network resources are occupied, and services on the network are affected.

To prevent broadcast storms, you can run the traffic-optimize unicast-suppression command to configure the maximum traffic volume of unknown unicast packets that can pass through an interface. When the traffic volume of unknown unicast packets reaches the maximum on an interface, the system discards excess unknown unicast packets to control the traffic volume in a proper range.

Example

# Set the maximum traffic volume of unknown unicast packets to 21600 pps in the traffic profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] traffic-profile name p1
[Huawei-wlan-traffic-prof-p1] traffic-optimize unicast-suppression packets 21600
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204366

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next