No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
speed (user interface view)

speed (user interface view)


The speed command sets the data transfer rate of a user interface.

The undo speed command restores the default data transfer rate of a user interface.

By default, the data transfer rate is 9600 bit/s.


speed speed-value

undo speed


Parameter Description Value
speed-value Specifies the data transfer rate of a user interface.

The value is expressed in bit/s.

The asynchronous serial interface supports the following data transfer rates:

  • 600 bit/s

  • 1200 bit/s

  • 4800 bit/s

  • 9600 bit/s

  • 19200 bit/s

  • 38400 bit/s

  • 57600 bit/s

  • 115200 bit/s


The console user interface does not support 600 bit/s and 1200 bit/s.


User interface view

Default Level

3: Management level

Usage Guidelines

This function takes effect for only serial interfaces.


# Set the data transfer rate of a user interface to 115200 bit/s.

<Huawei> system-view
[Huawei] user-interface console 0
[Huawei-ui-console0] speed 115200
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 249548

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next