No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap queue-size

snmp-agent trap queue-size


The snmp-agent trap queue-size command sets the queue length of the trap messages sent to a target host.

The undo snmp-agent trap queue-size command cancels the current settings.

The default value is 100.


snmp-agent trap queue-size size

undo snmp-agent trap queue-size


Parameter Description Value
size Specifies the queue length of trap messages. The value is an integer that ranges from 1 to 1000. The default value is 100.


System view

Default Level

3: Management level

Usage Guidelines

When a large number of trap messages need to be sent in a certain period of time, packets will be lost if the queue length of trap messages is insufficient. The queue length can be adjusted to reduce the packet loss ratio.

When the lifetime of trap messages is long, the queue length of trap messages needs to be lengthened. If the queue length is not lengthened, packet loss will occur.


# Set the queue length of the trap messages sent to the target host to 200.

<Huawei> system-view
[Huawei] snmp-agent trap queue-size 200
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206125

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next