No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ftp server enable

ftp server enable


The ftp server enable command enables the FTP server function to allow FTP users to log in to the FTP server.

The undo ftp server command disables the FTP server function so that FTP users cannot log in to the FTP server.

By default, the FTP function is disabled.


ftp server enable

undo ftp server




System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To manage FTP server files on a client, you must run the ftp server enable command to enable the FTP server function to allow FTP users to log in to the FTP server.


If the security FTP server function is disabled, no user can log in to the FTP server, and users who have logged in to the FTP server can perform only the logout operation.

The FTP protocol will bring risk to device security. The SFTP V2 mode is recommended.


# Enable the FTP server function.

<Huawei> system-view
[Huawei] ftp server enable
Warning: FTP is not a secure protocol, and it is recommended to use SFTP.
Info: Succeeded in starting the FTP server 
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210840

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next