No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe max-power (AP system profile view)

poe max-power (AP system profile view)

Function

The poe max-power command sets the maximum output power of a central AP.

The undo poe max-power command restores the maximum output power of a central AP to the default value.

By default, the maximum output power of the central AP is the total power that the PoE power supply provides for PDs.

Format

poe max-power max-power

undo poe max-power

Parameters

Parameter

Description

Value

max-power

Specifies the maximum output power of a central AP.

The value ranges from 15400 mW to 380000 mW.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenarios

By default, the system automatically obtains the maximum PoE power supported by the central AP. You can run the poe max-power command to set the maximum output power to ensure stable PoE power supply when the total power of the central AP is insufficient.

Precautions

If the maximum output power that you set is smaller than the total power required by PDs, PDs with lower priority are powered off.

The configured maximum output power must be smaller than the total power that the PoE power supply provides for PDs.

This command takes effect only on the AD9430DN-24 and AD9431DN-24X.

Example

# Set the maximum output power of a central AP to 20000 mW.
<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-system-profile name apsys1
[Huawei-wlan-ap-system-prof-apsys1] poe max-power 20000
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201330

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next