No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nat static enable

nat static enable


The nat static enable command enables static NAT on an interface.

The undo nat static enable command disables static NAT on an interface.

By default, static NAT on an interface is disabled.


nat static enable

undo nat static enable




VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Using the nat static enable command, you can enable static NAT on an interface.

This command can only be used on Layer 3 interfaces, except loopback and NULL interfaces.


# Enable static NAT on an interface.

<Huawei> system-view
[Huawei] interface vlanif 100
[Huawei-Vlanif100] nat static enable
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206174

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next