No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
traffic-optimize multicast-unicast enable

traffic-optimize multicast-unicast enable

Function

The traffic-optimize multicast-unicast enable command enables the function of converting multicast packets to unicast packets in a traffic profile.

The undo traffic-optimize multicast-unicast enable command disables the function of converting multicast packets to unicast packets in a traffic profile.

By default, the function of converting multicast packets to unicast packets is disabled in a traffic profile.

Format

traffic-optimize multicast-unicast enable

undo traffic-optimize multicast-unicast enable

Parameters

None

Views

Traffic profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can enable the function of converting multicast packets to unicast packets in scenarios that have high requirements on multicast stream transmission, such as a high-definition video on-demand scenario.

After the function is enabled, an AP listens on Report and Leave packets to maintain multicast-to-unicast entries. When sending multicast packets to the client, the AP converts the multicast packets to unicast packets based on the multicast-to-unicast entries to improve multicast stream transmission efficiency.

Example

# Enable the function of converting multicast packets to unicast packets in the traffic profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] traffic-profile name p1
[Huawei-wlan-traffic-prof-p1] traffic-optimize multicast-unicast enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194791

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next