No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids contain enable

wids contain enable

Function

(AP group radio view) The wids contain enable command enables rogue or interference device containment on all specified radios in an AP group.

(AP group radio view) The undo wids contain enable command disables rogue or interference device containment on all specified radios in an AP group.

(AP radio view) The wids contain enable command enables rogue or interference device containment on an AP radio.

(AP radio view) The undo wids contain enable command cancels the configuration of the rogue or interference device containment function on an AP radio. The status of this function on the AP radio is then determined by the status of this function in the AP group radio view.

By default, rogue or interference device containment is disabled on AP radios.

Format

wids contain enable

undo wids contain enable

Parameters

None

Views

AP group radio view, AP radio view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Rogue or interference devices pose serious security threats to enterprise networks.

After the containment mode is set against rogue or interference APs, the monitor RU uses the identity of the rogue or interference AP to broadcast disauthentication frames to forcibly disconnect STAs. To prevent the STAs from connecting to the rogue or interference AP again, the monitor RU will periodically and continuously send disauthentication frames.

After the containment mode is set against rogue or interference STAs or ad-hoc devices, the monitor RU uses the MAC address of a rogue or interference device to continuously send unicast disauthentication frames.

Precautions

The configuration in the AP radio view has a higher priority than that in the AP group radio view.

Follow-up Procedure

Run the contain-mode command to set the rogue or interference device containment mode.

Example

# Enable rogue or interference device containment on radio 0 in AP group office.
<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] ap-group name office
[Huawei-wlan-ap-group-office] radio 0
[Huawei-wlan-group-radio-office/0] wids contain enable
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203369

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next