No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The mesh-id command sets a Mesh ID for a Mesh profile.

The undo mesh-id command restores the Mesh ID of a Mesh profile to the default value.

By default, the Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH.


mesh-id name

undo mesh-id






Specifies the Mesh ID of a Mesh profile.

The value is a string of 1 to 32 case-sensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Mesh profile view

Default Level

2: Configuration level

Usage Guidelines

The Mesh ID of a Mesh profile is similar to the SSID. On a Mesh network, AP radios discover available Mesh services of other APs based on the Mesh ID.

Each Mesh profile must have a Mesh ID. The default Mesh ID of a Mesh profile is HUAWEI-WLAN-MESH. You can run the mesh-id command to set a Mesh ID for a Mesh profile.


# Create the Mesh profile test and set the Mesh ID of the profile to mesh-net.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] mesh-profile name test
[Huawei-wlan-mesh-prof-test] mesh-id mesh-net
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212780

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next