No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display hotspot2-profile

display hotspot2-profile

Function

The display hotspot2-profile command displays the configuration of a Hotspot2.0 profile.

Format

display hotspot2-profile { name profile-name | all }

Parameters

Parameter

Description

Value

name profile-name

Specifies the name of a Hotspot2.0 profile.

The Hotspot2.0 profile must exist.

all

Displays all Hotspot2.0 profiles.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

When configuring Hotspot2.0 services, you can run this command to view the configuration of Hotspot2.0 profiles.

Example

# Display all Hotspot2.0 profiles on a device.

<Huawei> display hotspot2-profile all
--------------------------------------------------------------------------------
Profile name                         Reference                                  
--------------------------------------------------------------------------------
hotspot                              1                                          
--------------------------------------------------------------------------------
Total: 1                                                                        
Table 23-5  Description of the display hotspot2-profile all command output

Item

Description

Profile name

Name of a Hotspot2.0 profile.

Reference

Number of times a Hotspot2.0 profile is referenced.

# Display the configuration of the Hotspot2.0 profile hotspot.

<Huawei> display hotspot2-profile name hotspot
--------------------------------------------------------------------------------
Network type                     : public-free                                  
Internet access                  : enable                                       
Venue group code                 : 3                                            
Venue type code                  : 3                                            
HESSID                           : e468-a350-89e0                               
IPv4 address availability        : available                                    
Network authentication type      : online-enroll                                
Redirect URL                     :                                              
P2P information element          : disable                                      
cellular-network-profile         : cellular-network-profile1                    
connection-capability-profile    : connection-capability-profile1               
operator-name-profile            : operator-name-profile1                       
operating-class-profile          : operating-class-profile1                     
operator-domain-profile          : operator-domain-profile1                     
NAI-realm-profile                : nai-realm-profile1                           
venue-name-profile               : venue-name-profile1                          
roaming-consortium-profile       : roaming-consortium-profile1                  
--------------------------------------------------------------------------------
Table 23-6  Description of the display hotspot2-profile name profile-name command output

Item

Description

Network type

Type of a Hotspot2.0 network.

To configure this parameter, run the network-authen-type command.

Internet access

Whether Hotspot2.0 networks support Internet access.

To configure this parameter, run the network-authen-type command.

Venue group code

Venue group code of a Hotspot2.0 network.

To configure this parameter, run the venue-type command.

Venue type code

Venue type code of a Hotspot2.0 network.

To configure this parameter, run the venue-type command.

HESSID

HESSID of a Hotspot2.0 network.

To configure this parameter, run the hessid command.

IPv4 address availability

Types of IPv4 addresses on a Hotspot2.0 network.

To configure this parameter, run the ipv4-address-avail command.

Network authentication type

Hotspot2.0 network authentication type.

To configure this parameter, run the network-authen-type command.

Redirect URL

Redirection URL if the Hotspot2.0 network authentication type is set to Portal authentication.

To configure this parameter, run the network-authen-type command.

P2P information element

Whether a Hotspot2.0 network allows for P2P device cross connections.

To configure this parameter, run the p2p-cross-connect disable command.

cellular-network-profile

Cellular network profile bound to a Hotspot2.0 profile.

To configure this parameter, run the cellular-network-profile (Hotspot2.0 profile view) command.

connection-capability-profile

Connection capability profile bound to a Hotspot2.0 profile.

To configure this parameter, run the connection-capability-profile (Hotspot2.0 profile view) command.

operator-name-profile

Operator name profile bound to a Hotspot2.0 profile.

To configure this parameter, run the operator-name-profile (Hotspot2.0 profile view) command.

operating-class-profile

Operating class profile bound to a Hotspot2.0 profile.

To configure this parameter, run the operating-class-profile (Hotspot2.0 profile view) command.

operator-domain-profile

Operator domain profile bound to a Hotspot2.0 profile.

To configure this parameter, run the operator-domain-profile (Hotspot2.0 profile view) command.

NAI-realm-profile

NAI realm profile bound to a Hotspot2.0 profile.

To configure this parameter, run the nai-realm-profile (Hotspot2.0 profile view) command.

venue-name-profile

Venue name profile bound to a Hotspot2.0 profile.

To configure this parameter, run the venue-name-profile (Hotspot2.0 profile view) command.

roaming-consortium-profile

Roaming consortium profile bound to a Hotspot2.0 profile.

To configure this parameter, run the roaming-consortium-profile (Hotspot2.0 profile view) command.

Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199105

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next