No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication-scheme (AAA view)

authentication-scheme (AAA view)

Function

The authentication-scheme command creates an authentication scheme and displays its view.

The undo authentication-scheme command deletes an authentication scheme.

By default, the default authentication scheme is used. This default authentication scheme can be modified but cannot be deleted. In the default authentication scheme:
  • Local authentication is used.
  • The offline policy is used for authentication failures.
By default, the system also provides the authentication scheme radius. The radius authentication scheme can be modified, but cannot be deleted. In the radius authentication scheme:
  • Local authentication is used.
  • The offline policy is used for authentication failures.

Format

authentication-scheme scheme-name

undo authentication-scheme scheme-name

Parameters

Parameter Description Value
scheme-name Specifies the name of an authentication scheme.

The value is a string of 1 to 32 case-sensitive characters. It cannot contain spaces or the following symbols: / \ : * ? " < > | @ ' %. The value cannot be - or --.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To authenticate users, run the authentication-scheme command to create an authentication scheme. Creating an authentication scheme is necessary before performing authentication-relevant configurations.

Follow-up Procedure

After an authentication scheme is created, run the authentication-mode (authentication scheme view) command to configure an authentication mode in an authentication scheme.

After an authentication scheme is configured, run the authentication-scheme (AAA domain view) command to apply the authentication scheme to a domain.

Precautions

If the configured authentication scheme does not exist, the authentication-scheme command creates an authentication scheme and displays the authentication scheme view. If the configured authentication scheme already exists, the authentication-scheme command directly displays the authentication scheme view.

To delete an authentication scheme applied to a domain, run the undo authentication-scheme (AAA domain view) command.

A maximum of 17 authentication schemes can exist on the device, including the default and radius authentication scheme.

Example

# Create an authentication scheme named newscheme.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] authentication-scheme newscheme
[Huawei-aaa-authen-newscheme]

# Access the default authentication scheme view.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] authentication-scheme default
[Huawei-aaa-authen-default]
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207837

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next