No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mac-address dynamic

display mac-address dynamic


The display mac-address dynamic command displays dynamic MAC address entries.

If no parameter is specified, all dynamic MAC address entries are displayed.


display mac-address dynamic [ vlan vlan-id | interface-type interface-number ] * [ verbose ]





vlan vlan-id

Displays dynamic MAC address entries in a specified VLAN.

The value is an integer that ranges from 1 to 4094.

interface-type interface-number

Displays dynamic MAC address entries with a specified outbound interface.
  • interface-type specifies the type of the outbound interface.
  • interface-number specifies the number of the outbound interface.



Displays detailed information about dynamic MAC address entries.



All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The MAC address table needs to be updated constantly because the network topology always changes. You can use this command to view learned MAC addresses in real time.

Follow-up Procedure

If the displayed dynamic MAC address entries are invalid, run the undo mac-address command to delete dynamic MAC address entries.


If you run the display mac-address dynamic command without parameters, all dynamic MAC address entries are displayed.

If the MAC address table does not contain any dynamic MAC address entry, no information is displayed.

When the wireless access point has a large number of dynamic MAC address entries, it is recommended that you specify parameters in the command to filter the output information. Otherwise, the following problems may occur due to excessive output information:
  • The displayed information is repeatedly refreshed, so you cannot find the required information.
  • The system traverses and retrieves information for a long time, and does not respond to any request.


# Display all dynamic MAC address entries.

<Huawei> display mac-address dynamic
MAC Address          VLAN/VSI                    Learned-From        Type       
0000-0000-0001    100/-                   GE0/0/1                    dynamic 
Total items displayed = 1 
Table 6-5  Description of the display mac-address dynamic command output



MAC Address

Destination MAC address in a dynamic MAC address entry.


ID of the VLAN or name of the VSI that a MAC address belongs to.


Interface that learns a MAC address.


Type of a MAC address entry.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 256096

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next