No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-server max-unresponsive-interval

radius-server max-unresponsive-interval


The radius-server max-unresponsive-interval command configures the longest unresponsive interval for a RADIUS server.

The undo radius-server max-unresponsive-interval command restores the default settings.

By default, the longest unresponsive interval for a RADIUS server is 300 seconds.


radius-server max-unresponsive-interval interval

undo radius-server max-unresponsive-interval






Specifies the longest unresponsive interval for a RADIUS server.

The value is an integer that ranges from 10 to 7200, in seconds.


System view

Default Level

3: Management level

Usage Guidelines

If the user access frequency is low and the device receives only a few authentication request packets sourced from users, the device cannot detect the RADIUS server status by periodically detecting authentication request packets. In this case, you can configure the mechanism of setting the RADIUS server status to Down if no response is received from the server for a long period of time to ensure that users can obtain escape authorization. When the interval between two consecutive authentication request packets that are not responded to is greater than the interval configured using the max-unresponsive-interval command, the RADIUS server status is set to Down.


# Set the longest unresponsive interval for a RADIUS server to 100 seconds.

<Huawei> system-view
[Huawei] radius-server max-unresponsive-interval 100
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194649

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next