No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-antenna valid-per-scope

smart-antenna valid-per-scope

Function

The smart-antenna valid-per-scope command sets the upper and lower valid packet error rate (PER) thresholds in the smart antenna algorithm.

The undo smart-antenna valid-per-scope command restores the default upper and lower valid PER thresholds in the smart antenna algorithm.

The default upper and lower valid PER thresholds are 80% and 20%, respectively.

Format

smart-antenna valid-per-scope { high-per-threshold high-per-threshold | low-per-threshold low-per-threshold }

undo smart-antenna valid-per-scope { high-per-threshold | low-per-threshold }

Parameters

Parameter

Description

Value

high-per-threshold high-per-threshold

Specifies the upper valid PER threshold.

The value is an integer that ranges from 50 to 90, in percentage. In addition, the value must be a multiple of 10.

low-per-threshold low-per-threshold

Specifies the lower valid PER threshold.

The value is an integer that ranges from 10 to 30, in percentage. In addition, the value must be a multiple of 10.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

In the smart antenna algorithm, an AP uses different antenna combinations to send training packets for antenna training. During smart antenna training, the transmit end (AP) sends training packets to a receive end (STA). The receive end measures the PER and RSSI in the received packets, and then sends the PER and RSSI to the transmit end. The transmit end collects information about all antenna combinations and corresponding PERs and RSSIs to determine the optimal antenna combination for the receiver.

The PER is a key basis for the smart antenna algorithm. After proper upper and lower valid PER thresholds are configured, the smart antenna algorithm can select a proper antenna combination to improve the coverage and anti-interference capability of a WLAN in indoor coverage scenarios.

Example

# Set the upper valid PER threshold to 80%.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] smart-antenna valid-per-scope high-per-threshold 80
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205614

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next