No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ntp-service enable

ntp-service enable


The ntp-service enable command enables the NTP service function on the local device.

The undo ntp-service enable command disables the NTP service function on the local device.

By default, the NTP service function on the local device is disabled.


ntp-service enable

undo ntp-service enable




System view

Default Level

2: Configuration level

Usage Guidelines

The NTP function can be used on a device only after the NTP service on the device is enabled.


# Enable the NTP service on the local device.

<Huawei> system-view
[Huawei] ntp-service enable 
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203437

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next