No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display autosave configuration

display autosave configuration

Function

The display autosave configuration command displays the automatic save parameters of the configuration data.

Format

display autosave configuration

Parameters

None

Views

All views

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Run this command when you want to check whether the function for automatically saving configuration data is enabled, enable or disable the automatic save function, and modify the automatic save interval or time.

Precautions

  • Run the autosave time command to set the time for automatically saving system configuration data.
  • Run the autosave interval command to set the interval for automatically saving system configuration data.
  • The frequent data save operation affects the lifespan of the system storage device. Do not set the automatic save interval to less than 1 hour. The automatic save interval of 24 hours or greater is recommended.

Example

# Display the automatic save parameters configured in the system.

<Huawei> display autosave configuration
  System autosave interval switch: on                                           
  Autosave interval: 120 minutes                                                
  Autosave type: configuration file                                             
                                                                                
  System autosave modified configuration switch: on                             
  Autosave interval: 30 minutes                                                 
  Autosave type: configuration file                                             
                                                                                
  System autosave time switch: off                                              
  Autosave time: 12:20:30                                                       
  Autosave type: configuration file
Table 2-35  Description of the display autosave configuration command output

Item

Description

System autosave interval switch

State of the automatic save function.

Autosave interval

Automatic save interval.

Autosave type

Type of the file that is automatically saved.

System autosave modified configuration switch

State of the function for automatically saving modified data.

System autosave time switch

State of the function for saving configuration data at the preset time.

Autosave time

Automatic save time.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205681

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next