No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
multimedia-air-optimize enable

multimedia-air-optimize enable


The multimedia-air-optimize enable command enables multimedia air interface optimization.

The undo multimedia-air-optimize enable command disables multimedia air interface optimization.

By default, multimedia air interface optimization is disabled.


multimedia-air-optimize enable

undo multimedia-air-optimize enable




RRM profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

WMM classifies data packets into the following access categories (ACs): AC_VO, AC_VI, AC_BE, and AC_BK. A set of EDCA parameters is set for each AC queue. These parameters determine the capabilities of a queue to occupy a channel. You can set EDCA parameters for packets of different ACs to provide differentiated priorities to the packets and different capabilities to compete for channels. In this way, differentiated services are implemented.

After multimedia air interface optimization is enabled, the system dynamically adjusts EDCA parameter settings and ACK policies based on the number of different types of access users, improving user experience on voice and video applications.

The number of voice or video users is identified based on the user packet density threshold configured using the multimedia-air-optimize threshold command. If the number of voice or video packets sent by a user through the internal statistics queue of a radio with the unit time (1 second) exceeds the threshold, the user is considered a voice or video user.


After the multimedia-air-optimize enable command is executed, the wmm edca-ap and wmm edca-client (SSID profile view) commands do not take effect.


# Enable multimedia air interface optimization in the RRM profile p1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] rrm-profile name p1  
[Huawei-wlan-rrm-prof-p1] multimedia-air-optimize enable
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 246411

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next