No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eapol-start dest-address transform-to

eapol-start dest-address transform-to

Function

The eapol-start dest-address transform-to command configures an RU to encapsulate EAPOL-start packets into broadcast, multicast, or unicast packets.

The undo eapol-start dest-address transform-to command restores the default settings.

By default, an RU encapsulates EAPOL-start packets into multicast packets.

Format

eapol-start dest-address transform-to { broadcast | multicast | mac mac-address }

undo eapol-start dest-address transform-to

Parameters

Parameter

Description

Value

broadcast

Configures an RU to encapsulate EAPOL-start packets into broadcast packets.

-

multicast

Configures an RU to encapsulate EAPOL-start packets into multicast packets.

-

mac mac-address

Configures an RU to encapsulate EAPOL-start packets into unicast packets.

The value is in H-H-H format. An H is a hexadecimal number of four digits.

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

  • If the authentication server can only process EAP multicast packets, configure the RU to encapsulate EAPOL-start packets into multicast packets.
  • If the authentication server can only process EAP broadcast packets, configure the RU to encapsulate EAPOL-start packets into broadcast packets.
  • If the authentication server can only process EAP unicast packets, configure the RU to encapsulate EAPOL-start packets into unicast packets. When the RU is configured to encapsulate EAPOL-start packets into unicast packets, a unicast MAC address must be configured.

Example

# Configure an RU to encapsulate EAPOL-start packets into broadcast packets.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-system-profile name ap-system1
[Huawei-wlan-ap-system-prof-ap-system1] eapol-start dest-address transform-to broadcast  
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194778

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next