No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display mesh-handover-profile

display mesh-handover-profile

Function

The display mesh-handover-profile command displays reference or configuration information about a Mesh handover profile.

Format

display mesh-handover-profile { all | name profile-name }

Parameters

Parameter

Description

Value

all

Displays reference information about all Mesh handover profiles.

-

name profile-name

Displays information about a specified Mesh handover profile.

The Mesh handover profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mesh-handover-profile command to view the number of times a Mesh handover profile is referenced by a Mesh profile or parameter settings of a specified Mesh handover profile.

Example

# Display reference information about all Mesh handover profiles.

<Huawei> display mesh-handover-profile all
--------------------------------------------------------------------------------
Profile name                         Reference                                  
--------------------------------------------------------------------------------
default                              0                                          
test                                 2                                          
--------------------------------------------------------------------------------
Total: 2                                                                        
Table 14-2  Description of the display mesh-handover-profile all command output

Item

Description

Profile name

Name of a Mesh handover profile.

To create a Mesh handover profile, run the mesh-handover-profile command.

Reference

Number of times a Mesh handover profile is referenced by a Mesh profile.

# Display information about the Mesh handover profile test.

<Huawei> display mesh-handover-profile name test
--------------------------------------------------------------------------------
Handover location based algorithm switch            : disable                   
Handover location based algorithm moving direction  : undetermined              
Handover probe interval(ms)                         : 100                       
Handover Max RSSI threshold(dBm)                    : -20                       
Handover Min RSSI threshold(dBm)                    : -60                       
Handover hold period(ms)                            : 4000                      
Handover RSSI margin(dB)                            : 10                        
Handover P-N criteria observe time                  : 3                         
Handover P-N criteria qualify time                  : 2                         
Urgent handover low rate threshold(Mbps)            : 10                        
Urgent handover low rate period(ms)                 : 2000                      
Urgent handover punishment period(ms)               : 2000                      
Urgent handover punishment RSSI(dB)                 : 10                        
--------------------------------------------------------------------------------
Table 14-3  Description of the display mesh-handover-profile name command output

Item

Description

Handover location based algorithm switch
Status of the location-based enhanced fast link handover algorithm.
  • disable: The algorithm is disabled.
  • enable: The algorithm is enabled.

To configure the parameter, run the location-based-algorithm enable command.

Handover location based algorithm moving direction
Moving direction of the vehicle-mounted AP when the location-based enhanced fast link handover algorithm is enabled.
  • backward: The vehicle-mounted AP moves from the trackside AP with the largest sequence number to the trackside AP with the smallest sequence number.
  • forward: The vehicle-mounted AP moves from the trackside AP with the smallest sequence number to the trackside AP with the largest sequence number.
  • undetermined: The vehicle-mounted AP automatically adjusts its moving direction.

To configure the parameter, run the location-based-algorithm enable moving-direction { backward | forward | undetermined } command.

Handover probe interval

Mesh link probe interval.

To configure the parameter, run the link-probe-interval command.

Handover Max RSSI threshold

Maximum RSSI threshold of a Mesh link.

To configure the parameter, run the max-rssi-threshold command.

Handover Min RSSI threshold

Minimum RSSI threshold of a Mesh link.

To configure the parameter, run the min-rssi-threshold command.

Handover hold period

Holding time of a Mesh link.

To configure the parameter, run the link-hold-period command.

Handover RSSI margin

RSSI threshold for a Mesh link handover.

To configure the parameter, run the rssi-margin command.

Handover P-N criteria observe time

Observing value in the P/N criterion.

To configure the parameter, run the p-n criteria command.

Handover P-N criteria qualify time

Qualified value in the P/N criterion.

To configure the parameter, run the p-n criteria command.

Urgent handover low rate threshold

Minimum rate threshold for an emergency handover.

To configure the parameter, run the urgent-handover low-rate command.

Urgent handover low rate period

Minimum rate holding time for an emergency handover.

To configure the parameter, run the urgent-handover low-rate command.

Urgent handover punishment period

Penalty period for an emergency handover.

To configure the parameter, run the urgent-handover punishment command.

Urgent handover punishment RSSI

Penalty level for an emergency handover.

To configure the parameter, run the urgent-handover punishment command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 199306

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next