No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
air-scan-profile (radio profile view)

air-scan-profile (radio profile view)


The air-scan-profile command binds an air scan profile to a radio profile.

The undo air-scan-profile command unbinds an air scan profile from a radio profile.

By default, the air scan profile default is bound to a radio profile.


air-scan-profile profile-name

undo air-scan-profile






Specifies the name of an air scan profile.

The air scan profile name must already exist.


2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

After you create an air scan profile using the air-scan-profile command, bind it to a radio profile so that the air scan profile can take effect.


# Bind the air scan profile air-scan01 to the radio profile office01.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] air-scan-profile name air-scan01
[Huawei-wlan-air-scan-prof-air-scan01] quit
[Huawei-wlan-view] radio-2g-profile name office01
[Huawei-wlan-radio-2g-prof-office01] air-scan-profile air-scan01
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194969

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next