No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pki match-rsa-key

pki match-rsa-key


The pki match-rsa-key command configures a device to search for the RSA key pair associated with a specific certificate.


pki match-rsa-key certificate-filename file-name


Parameter Description Value
certificate-filename file-name Specifies the name of a certificate file. The value must be an existing certificate file name.


System view

Default Level

3: Management level

Usage Guidelines

Run this command to check the RSA key pair corresponding to a certificate. After configuration, the system searches for all the local RSA key pairs, compares them with the specified certificate and outputs the matched RSA key pair name once it is searched out.


# Configure a device to search for the RSA key pair that matches certificate file local.cer.

<Huawei> system-view
[Huawei] pki match-rsa-key certificate-filename local.cer
 Info: The file local.cer contains certificates 1. 
 Info: Certificate 1 from file local.cer matches RSA key rsa2.key. 
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207944

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next