commit (AP provisioning view)
Format
commit { ap-name ap-name | ap-mac ap-mac-address | ap-id ap-id | ap-group ap-group-name | all }
Parameters
Parameter |
Description |
Value |
|---|---|---|
ap-name ap-name |
Commits configuration to the RU with the specified RU name. |
The RU name must already exist. |
ap-mac ap-mac-address |
Commits configuration to the RU with the specified MAC address. |
The RU's MAC address must already exist. |
ap-id ap-id |
Commits configuration to the RU with the specified RU ID. |
The RU ID must already exist. |
ap-group ap-group-name |
Commits configuration to the RU in the specified RU group. |
The RU group must already exist. |
| all | Commits configuration to all the on-line RUs. |
- |
Usage Guidelines
Usage Scenario
You can configure AP provisioning parameters on the Central AP, such as the RU's management VLAN, static IP address, gateway, and Central AP list. After the configuration is complete, run the commit command, and the configuration will be delivered to the RU.
Prerequisites
RUs have gone online on the Central AP.
Precautions
- After the configuration is committed, the RU receives the configuration and compares the configuration with its local configuration.
- If they are consistent, the RU does not process the received configuration.
- If they are different, the RU saves the committed configuration and automatically restarts, and the received configuration takes effect.
If the name or static IP address of an RU is specified in the AP provisioning view, the configuration is delivered only to the RU by specifying the RU name or MAC address, but cannot be delivered to RUs in the specified AP group.
If you commit configurations to a large number of RUs simultaneously, some of the RUs may fail to receive the configurations. In this case, you are advised to commit the configurations again.
Example
# Commit configuration to the RU with the MAC address 0023-0024-0080.
<Huawei> system-view [Huawei] wlan [Huawei-wlan-view] provision-ap [Huawei-wlan-provision-ap] commit ap-mac 0023-0024-0080 Warning: The incorrect configuration will cause the AP to go out of management. This operation will deliver parameter setting and ma y cause reboot of AP(s). Continue?[Y/N]:y
Previous
