No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display webmng configuration

display webmng configuration

Function

The display webmng configuration command displays the configuration of the WEBMNG module.

Format

display webmng configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After configuring user management based on HTTP or HTTPS, you can run this command to check the configuration of the WEBMNG module.

Example

# Display the configuration of the WEBMNG module.

<Huawei> display webmng configuration
  Manager Type           : http
  Ssl-policy             : -
  Port                   : 8080
  Acl                    : -
Table 26-67  Description of the display webmng configuration command output

Item

Description

Manager Type

Management type.

  • http: user management based on HTTP
  • https: user management based on HTTPS

To configure the management type, run the remote-access-user manage command.

Ssl-policy

SSL policy used by the built-in Portal server.

To configure the SSL policy, run the remote-access-user manage command.

Port

Port number for user management based on HTTP or HTTPS.

To configure the port number, run the remote-access-user manage command.

Acl

ACL number. You can use an ACL to specify users to be managed.

To configure the ACL number, run the remote-access-user manage command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202394

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next