ap-id
Format
ap-id ap-id [ [ type-id type-id | ap-type ap-type ] { ap-mac ap-mac | ap-sn ap-sn | ap-mac ap-mac ap-sn ap-sn } ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
ap-id |
Specifies the RU ID. |
The value is an integer that ranges from 1 to 127. |
type-id type-id |
Specifies the RU type ID. |
The value is an integer that ranges from 0 to 255. |
ap-type ap-type |
Specifies the RU type. |
The value is a string of 1 to 31 characters. |
ap-mac ap-mac |
Specifies the MAC address of an RU. |
The value is in H-H-H format. An H is a hexadecimal number of 4 digits. |
ap-sn ap-sn |
Specifies the serial number (SN) of an RU. |
The value is a string of 1 to 31 characters, and can only contain letters and digits. |
Usage Guidelines
Usage Scenario
After an RU is successfully added to a Central AP, you can configure parameters for the RU offline. When the RU goes online, it uses the configured parameters.
You can run the undo ap command to delete an RU.
Precautions
To add an AP, you must enter the MAC address, SN, or MAC address+SN. In MAC address authentication mode, enter the MAC address of the AP. In SN authentication mode, enter the SN of the AP.
To enter the AP view, you only need to enter the RU ID.
Previous
