No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset stp statistics

reset stp statistics


The reset stp statistics command clears the statistics of a spanning tree.


reset stp [ interface interface-type interface-number ] statistics


Parameter Description Value
interface interface-type interface-number Specifies an interface type and the number of the interface.



User view

Default Level

3: Management level

Usage Guidelines

Sometimes, traffic statistics within a certain period is needed. In this situation, clear the existing statistics before restarting the count.

When you run the reset stp statistics command:

  • If you specify an interface, you can clear the statistics of a spanning tree on the interface.

  • If you do not specify an interface, you can clear the statistics of spanning trees on all interfaces.


# Clear the statistics of spanning trees on GE0/0/1.

<Huawei> reset stp interface gigabitethernet 0/0/1 statistics
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207060

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next