No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
portal local-server timer session-timeout

portal local-server timer session-timeout

Function

The portal local-server timer session-timeout command configures the session timeout interval for built-in Portal authentication users.

The undo portal local-server timer session-timeout command restores the default session timeout interval for built-in Portal authentication users.

By default, the session timeout interval is 8 hours for built-in Portal authentication users.

Format

portal local-server timer session-timeout interval

undo portal local-server timer session-timeout

Parameters

Parameter Description Value
interval

Specifies the session timeout interval for built-in Portal authentication users.

The value is an integer that ranges from 1 to 720, in hours.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Scenario

When built-in Portal authentication is used for users and the device functions as a built-in Portal server, you can configure the session timeout interval for the users. The users are disconnected after the specified session timeout interval. To connect to the network again, the users need to be re-authenticated.

Precautions

The session timeout interval for built-in Portal authentication users is calculated based on the device time. For example, if the session timeout interval is 6 hours and the device time is 2014-09-01 02:00:00 when a user was connected, the user should be disconnected at 2014-09-01 08:00:00. Therefore, ensure that the device time and time zone are correct after the session timeout interval is configured for users. If the device time is incorrect, users may fail to be connected or disconnected properly. You can run the display clock command to check the device time and the time zone.

Example

# Set the session timeout interval to 10 hours for built-in Portal authentication users.

<Huawei> system-view
[Huawei] portal local-server timer session-timeout 10
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207498

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next