No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
keepalive (WMI view)

keepalive (WMI view)


The keepalive command configures connection parameters between APs and the WMI server.

The undo keepalive command restores the default settings of connection parameters between APs and the WMI server.

By default, the heartbeat interval is 3 minutes, the reconnection interval is 5 minutes, and the number of reconnection attempts is 0. For cloud devices, the connection parameters are delivered by the Agile Controller-Campus.


keepalive { interval interval | retry-interval retry-interval | retry-number retry-number } *

undo keepalive


Parameter Description Value
interval interval Specifies the heartbeat interval. The value is an integer that ranges from 1 to 60, in minutes.
retry-interval retry-interval Specifies the reconnection interval after an AP is disconnected from the server. The value is an integer that ranges from 5 to 60, in minutes.
retry-number retry-number Specifies the number of reconnection attempts. The value is an integer that ranges from 0 to 4294967295.

The value 0 indicates that the server and APs always attempt to reconnect to each other.


WMI view

Default Level

2: Configuration level

Usage Guidelines



# Set the number of reconnection attempts to 5.
<Huawei> system-view
[Huawei] wmi-server
[Huawei-wmi-server] keepalive retry-number 5
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204075

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next