No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remark dscp (QoS profile view)

remark dscp (QoS profile view)


The remark dscp command configures an action of re-marking the DSCP priority in IP packets in a QoS profile.

The undo remark dscp command deletes the configuration.

By default, an action of re-marking the DSCP priority in IP packets is not configured in a QoS profile.


remark { inbound | outbound } dscp { dscp-name | dscp-value }

undo remark { inbound | outbound } dscp






Re-marks the DSCP priority in IP packets in the inbound direction.



Re-marks the DSCP priority in IP packets in the outbound direction.



Specifies the DSCP priority name in IP packets.

The value can be ef, af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cs1, cs2, cs3, cs4, cs5, cs6, cs7, or default.


Specifies the DSCP priority in IP packets.

The value is an integer that ranges from 0 to 63. A larger value indicates a higher priority.


QoS profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To provide differentiated services based on the DSCP priority of packets, run the remark dscp command to configure the device to re-mark the DSCP priority of the packets.

Follow-up Procedure

Run the qos-profile (user group view) command in the user group view to bind the user group to the corresponding QoS profile that has DSCP priority re-marking configured.


If a traffic policy containing remark dscp is applied to the outbound direction on an interface, the device still processes outgoing packets based on the original priority but the downstream Layer 3 device or above processes the packets based on the re-marked priority.

If you run the remark dscp command repeatedly in the same QoS profile view, only the latest configuration takes effect.


# Re-mark the DSCP priority in IP packets in the inbound direction as 56 in the QoS profile view.

<Huawei> system-view
[Huawei] qos-profile name name1
[Huawei-qosprofile-name1] remark inbound dscp 56
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205371

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next