No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
authentication user-alarm percentage

authentication user-alarm percentage

Function

The authentication user-alarm percentage command sets alarm thresholds for the percentage of successfully authenticated NAC users.

The undo authentication user-alarm command restores the default alarm thresholds for the percentage of successfully authenticated NAC users.

By default, the lower alarm threshold for the percentage of successfully authenticated NAC users is 50, and the upper alarm threshold is 100.

Format

authentication user-alarm percentage percent-lower-value percent-upper-value

undo authentication user-alarm

Parameters

Parameter Description Value
percent-lower-value

Specifies the lower alarm threshold for the percentage of successfully authenticated NAC users.

The value is an integer in the range from 1 to 100.

percent-upper-value

Specifies the upper alarm threshold for the percentage of successfully authenticated NAC users.

The value is an integer in the range from 1 to 100, and must be greater than or equal to the lower alarm threshold.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

When the number of successfully authenticated NAC users reaches a specified percentage, the device generates an alarm. You can run the authentication user-alarm percentage command to set the upper and lower alarm thresholds for this percentage.

When the percentage of successfully authenticated NAC users against the maximum number of users allowed by the device is greater than or equal to the upper alarm threshold, the device generates an alarm. When this percentage reaches or falls below the lower alarm threshold, the device generates a clear alarm.

Example

# Set the lower and upper alarm thresholds for the percentage of successfully authenticated NAC users to 30 and 80, respectively.

<Huawei> system-view
[Huawei] authentication user-alarm percentage 30 80
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202238

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next