No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display interface eth-trunk

display interface eth-trunk

Function

The display interface eth-trunk command displays the status of an Eth-Trunk.

Format

display interface eth-trunk [ trunk-id | main ]

Parameters

Parameter Description Value
trunk-id Specifies the ID of an Eth-Trunk.

The value is an integer that ranges from 0 to 7.

main

Displays status and traffic statistics about an Eth-Trunk main interface.

If you do not specify the main parameter, status and traffic statistics about both an Eth-Trunk main interface and Eth-Trunk sub-interfaces are displayed.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display interface eth-trunk command to view the status and weight of each member interface of the Eth-Trunk.

To monitor the status of an interface or locate an interface fault, you can use the display interface eth-trunk command to collect the status of and statistics on the interface. You can collect traffic statistics and locate faults on the interface according to the command output.

Example

# Display the status of Eth-Trunk 5.

<Huawei> display interface Eth-Trunk 5
Eth-Trunk5 current state : DOWN                                                 
Line protocol current state : DOWN                                              
Description:HUAWEI, AP Series, Eth-Trunk5 Interface                             
Switch Port, PVID :    1, TPID : 8100(Hex), Hash arithmetic : According to src-d
st-ip,The Maximum Frame Length is 9216                                          
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is dcd2-fcf9-b5ca 
Current system time: 2011-12-14 04:26:14+08:00                                  
Input: 0 packets, 0 bytes                                                       
  Unicast:                  0,  Multicast:                0                     
  Broadcast:                0,  Discard:                  0                     
  Total Error:              0                                                   
                                                                                
Output: 0 packets, 0 bytes                                                      
  Unicast:                  0,  Multicast:                0                     
  Broadcast:                0,  Discard:                  0                     
  Total Error:              0                                                   
                                                                                
    Input bandwidth utilization  :    0%                                        
    Output bandwidth utilization :    0%                                        
-----------------------------------------------------                           
PortName                      Status      Weight                                
-----------------------------------------------------                           
-----------------------------------------------------                           
The Number of Ports in Trunk : 0                                                
The Number of UP Ports in Trunk : 0                                             
                                             
Table 6-11  Description of the display interface eth-trunk command output

Item

Description

Eth-Trunk5 current state

Status of the Eth-Trunk5:
  • UP: indicates that the interface is properly started.

  • DOWN: indicates that the interface is faulty.

  • Administratively Down: If the administrator uses the shutdown (interface view) command on the interface, the state is Administratively Down.

Line protocol current state

Link layer protocol status of the interface:
  • DOWN: indicates that the link layer protocol of the interface fails or no IP address is assigned to the interface.
  • UP: indicates that the link layer protocol of the interface is running properly.

Description

Description of the interface.

Switch Port

Layer 2 interface.

PVID

ID of the VLAN to which the interface belongs

TPID

Type of frames that are supported on the interface.

By default, this field displays 0x8100, indicating an 802.1Q frame.

This field is displayed only for a Layer 2 interface.

Hash arithmetic

Hash algorithm used for load balancing among member interfaces of the Eth-Trunk.

The Maximum Frame Length

MTU of the Eth-Trunk.

IP Sending Frames' Format

Format of the frame contained in the sent IP packet, which can be PKTFMT_ETHNT_2, Ethernet_802.3, or Ethernet_SNAP.

Hardware address

MAC address of the Eth-Trunk.

Current system time

Indicates the current system time.

If the system is configured with a time zone and is in the summer time, the time is displayed in the format of YYYY/MM/DD HH:MM:SS UTC±HH:MM DST.

Input bandwidth utilization

Inbound bandwidth usage.

Output bandwidth utilization

Outbound bandwidth usage.

Input

Number of packets received by the interface.

Output

Number of packets sent by the interface.

packets

Total number of packets that the interface receives or sends.

bytes

Total number of bytes that the interface receives or sends.

unicast

Number of unicast packets that the interface receives or sends.

broadcast

Number of broadcast packets that the interface receives or sends.

multicast

Number of multicast packets that the interface receives or sends.

Discard

Number of packets discarded by the Eth-Trunk during physical layer detection.

Total Error

Number of error packets discovered by the Eth-Trunk during physical layer detection.

PortName

Name of the Eth-Trunk member interface.

Status

Status of the Eth-Trunk member interface.

Weight

Weight of the Eth-Trunk member interface in load balancing.

The Number of Ports in Trunk

Number of Eth-Trunk member interfaces.

The Number of UP Ports in Trunk

Number of Eth-Trunk member interfaces in Up state.

Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203443

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next