No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap all

display snmp-agent trap all

Function

The display snmp-agent trap all command checks current and default status of all traps in all features.

Format

display snmp-agent trap all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

After the device is enabled to send traps to the NMS, you can run the display snmp-agent trap all command to check the status of all traps in all features.

Example

# Check the default status of all traps in all features.

<Huawei> display snmp-agent trap all
-------------------------------------------------------------------------------  
Feature name: SSH                                                               
Trap number : 1                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwSSHSftpUserNumExceedMax       off                     off                     
------------------------------------------------------------------------------  
Feature name: VFS                                                               
Trap number : 3                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwFlhOperNotification           off                     off                     
hwFlhSyncSuccessNotification    off                     off                     
hwFlhSyncFailNotification       off                     off                     
------------------------------------------------------------------------------  
  ---- More ----                                                                
Table 28-9  Description of the display snmp-agent trap all command output

Item

Description

Feature name

Name of the feature that generates traps.

Trap number

Number of traps generated by this feature.

Trap name

Trap name.

Default switch status

Default status of the trap function:
  • on: indicates that the trap function is enabled.
  • off: indicates that the trap function is disabled.

Current switch status

Current status of the trap function:
  • on: indicates that the trap function is enabled.
  • off: indicates that the trap function is disabled.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195122

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next