No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center logfile path

info-center logfile path


The info-center logfile path command configures the path where log files are saved.


info-center logfile path path


Parameter Description Value

Specifies the path where log files are saved, which is in the format of storage medium name:/logfile, for example, flash:/logfile.

Select the path according to device configuration.


System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the info-center logfile path command to set the path where log files are saved. Then log files are saved into the path and the file name is log.log. To view logs generated by the AP, run the save logfile command to save logs into a specified file or configure the AP to export information into a specified log file. Then run the display logfile command to view the log file.


The information center has been enabled by using the info-center enable command.


# Configure the flash drive as the path where log files will be saved.

<Huawei> system-view
[Huawei] info-center logfile path flash:/logfile
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 127347

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next