No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cable-snr-test

cable-snr-test

Function

The cable-snr-test command checks the network cable quality and displays the check result.

NOTE:

Format

cable-snr-test

Parameters

None

Views

MultiGE interface view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can check the quality of the network cable on a MultiGE electrical interface to determine whether the network cable quality meets communication requirements.

Precautions

  • This command checks real-time quality of the network cable on an interface, and the network cable quality changes with the external environment.
  • A MultiGE electrical interface supports the network cable quality check only when it works at the rate of 2.5 Gbit/s or higher.
  • An interface does not support the network cable quality check when it is Down or in loopback detection mode.

Example

# Check the network cable quality on MultiGE0/0/1.
<Huawei> system-view
[Huawei] interface MultiGE 0/0/1
[Huawei-MultiGE0/0/1] cable-snr-test
Info: The current network cable is of good quality.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 91549

Downloads: 63

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next