No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
put (FTP client view)

put (FTP client view)


The put command uploads a local file to the remote FTP server.


put local-filename [ remote-filename ]


Parameter Description Value
local-filename Specifies the local file name of the FTP client. The value is a string of 1 to 64 case-sensitive characters without spaces.
remote-filename Specifies the name of the file to be uploaded to the remote FTP server. The value is a string of 1 to 64 case-sensitive characters without spaces.


FTP client view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

You can run the put command to upload a local file to the remote FTP server for further check and backup. For example, you can upload the local log file to the FTP server for other users to check, and upload the configuration file to the FTP server as a backup before upgrading the device.


  • If the file name is not specified on the remote FTP server , the local file name is used.

  • If the name of the uploaded file is the same as that of an existing file on the FTP server, the system overwrites the existing file.


# Upload the configuration file to the remote FTP server as a backup, and save it as

<Huawei> ftp
Trying ...
Press CTRL+K to abort
Connected to
220 FTP service ready.
331 Password required for huawei.
Enter password:
230 User logged in. 
[Huawei-ftp] put 
200 Port command successful.
150 Opening BINARY mode data connection for file transfer.
226 Transfer complete
FTP: 1098 byte(s) sent in 0.131 second(s) 8.38Kbyte(s)/sec.
Related Topics
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 126400

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next