No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
management-vlan

management-vlan

Function

The management-vlan command configures CAPWAP packets sent from an AP wired interface to carry a management VLAN tag.

The undo management-vlan command cancels the management VLAN configuration for CAPWAP packets sent from an AP wired interface.

By default, CAPWAP packets sent from an AP wired interface do not carry a management VLAN tag.

Format

management-vlan vlan-id

undo management-vlan

Parameters

Parameter

Description

Value

vlan-id

Specifies a management VLAN ID.

The value is an integer that ranges from 1 to 4094.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, CAPWAP packets sent from an AP wired interface do not carry a management VLAN tag. In most cases, the access switch interface directly connected to the AP adds the PVID to the CAPWAP packets as the management VLAN ID.

If the PVID of the access device has been used for other purposes (for example, as the default VLAN ID of wired users), the PVID cannot be configured as the management VLAN ID on the access device interface. In this case, configure CAPWAP packets sent from an AP wired interface to carry the management VLAN tag. The AP then adds the management VLAN ID to the CAPWAP packets sent to the AC. You only need to configure the access device to allow the packets carrying the management VLAN ID to pass.

Precautions

The configuration takes effect only after the AP is restarted.

Example

# Configure CAPWAP packets sent from an AP wired interface to carry management VLAN 2.

<Huawei> system-view
[Huawei] management-vlan 2
Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 88225

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next