No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dns proxy ipv6 enable

dns proxy ipv6 enable


The dns proxy ipv6 enable command enables IPv6 DNS proxy.

The undo dns proxy ipv6 enable command disables IPv6 DNS proxy.

By default, IPv6 DNS proxy is disabled.


dns proxy ipv6 enable

undo dns proxy ipv6 enable




System view

Default Level

2: Configuration level

Usage Guidelines

IPv6 DNS proxy is used to forward DNS requests and reply packets between the IPv6 DNS client and DNS server. The IPv6 DNS client sends a DNS request packet to the device on which IPv6 DNS proxy is enabled. The device sends the request packet to the DNS server and sends the reply packet to the IPv6 DNS client. The device functions as the IPv6 DNS proxy to provide services of the DNS server. Users do not need to interact with the DNS server directly. This function simplifies route deployment and improves performance and security of the DNS server.


# Enable IPv6 DNS proxy.

<Huawei> system-view
[Huawei] dns proxy ipv6 enable
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 157674

Downloads: 128

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next