No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
anti-attack enable

anti-attack enable

Function

The anti-attack enable command enables defense against all attack packets.

The undo anti-attack enable command disables defense against all attack packets.

The anti-attack disable command disables defense against all attack packets.

By default, defense against all attack packets is enabled.

Format

anti-attack enable

undo anti-attack enable

anti-attack disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Different types of attacks on a network cause high device usage or system breakdown, affecting network services. To prevent the system from breaking down and to ensure normal network services, run the anti-attack enable command to enable defense against all attack packets.

Precautions

Running the anti-attack enable command is equivalent to running all of the following commands:

Example

# Enable defense against all attack packets.

<Huawei> system-view
[Huawei] anti-attack enable
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 126159

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next