No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display network status

display network status

Function

Running the display network status command, you can check the network status of a device.

Format

display network status { all | tcp | udp | port port-number }

Parameters

Parameter Description Value
all Displays all the network information. -
tcp Displays TCP. -
udp Displays UDP. -
port port-number Specifies the number of an interface. The value is an integer ranging from 1 to 65535.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display network status command is used to check the network status, such as the running interfaces and services on the network. For example, when you find that an interface is being used by an unknown module during a security scan, run the command to check out the module.

Example

# Display the IPv4 RawIP connection status.
<Huawei> display network status all
Proto Task/SockId Local Addr&Port          Foreign Addr&Port        State
TCP   VTYD/1      0.0.0.0:23               0.0.0.0:0                Listening
TCP   VTYD/3      10.23.23.1:23            10.23.23.201:4332        Established
TCP6  VTYD/2      ::->23                   ::->0                    Listening
UDP   NTPT/1      0.0.0.0:123              0.0.0.0:0
UDP   AGNT/1      0.0.0.0:161              0.0.0.0:0
UDP   RDS /1      0.0.0.0:1812             0.0.0.0:0
UDP   WEB /1      0.0.0.0:2000             0.0.0.0:0
UDP   L2_P/1      0.0.0.0:40000            0.0.0.0:0
UDP   NAP /1      0.0.0.0:53535            0.0.0.0:0
UDP6  NTPT/2      ::->123                  ::->0
UDP6  AGT6/1      ::->161                  ::->0
Table 6-48  Description of the display network status command output

Item

Description

Proto Task/SockId

Protocol Task and Socket ID

Local Addr&Port

Local IP address and Port number

Foreign Addr&Port

Remote IP address and Port number

State

Connection status

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 92928

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next