No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display portal

display portal


The display portal command displays the Portal authentication configuration.


Only branch APs support this command.


display portal [ configuration ]






Displays the global Portal authentication information.



All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display portal command to view the Portal authentication configuration and check whether the configuration is correct.


# Display the Portal authentication configuration.

<Huawei> display portal
  Portal max-user number:10240
  Quiet function is Enabled
  Different-server is Enabled 
  Parameter set:Quiet Period        60s   Quiet-times          3
  User-defined HTTP redirection port number: -
  Logout packets resend: Resend-times 3  Timeout 5s
  Portal 302 Redirect  : Enable       
Table 13-30  Description of the display portal command output



Portal max-user number

Maximum number of concurrent Portal authentication users allowed to access the device.

Quiet function is Enabled or Quiet function is Disabled

Whether the quiet function in Portal authentication is enabled:
  • Enabled
  • Disabled

Different-server is Enabled or Different-server is Disabled

Whether a device is enabled to process user logout requests sent by a Portal server other than the one from which users log in:
  • Enabled
  • Disabled

Parameter set

Parameter settings of the quiet function in Portal authentication.
  • Quiet Period: indicates the quiet period in Portal authentication.
  • Quiet-times: indicates the maximum number of authentication failures within 60 seconds before a Portal authentication user enters the quiet state.
User-defined HTTP redirection port number A user-defined destination port number of HTTP packets that trigger Portal redirection.

Logout packets resend

Configuration of the logout packet re-transmission function for Portal authentication users.
  • Resend-times: indicates the number of re-transmission times for Portal authentication user logout packets.
  • Timeout: indicates the re-transmission interval of Portal authentication user logout packets.
Portal 302 Redirect
Whether redirection based on the status code 302 is enabled for Portal authentication:
  • Enable
  • Disable
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 125609

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next