No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The interface command displays the interface view.


interface interface-type interface-number

undo interface interface-type interface-number


Parameter Description Value
interface-type interface-number

Specifies the type and number of an interface. The interface type and number can be closely next to each other or separated by a space character.



System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the specified interface view is displayed, you can set attributes for the interface.


  • The interface command can display only the view of an existing physical interface and cannot create a physical interface.

  • The interface command can create a logical interface and display the view of the logical interface.


# Display the view of GE0/0/1.

<Huawei> system-view
[Huawei] interface gigabitethernet 0/0/1
Related Topics
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 129176

Downloads: 103

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next