No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display radius-attribute

display radius-attribute

Function

The display radius-attribute command displays the RADIUS attributes supported by the device.

NOTE:

Only branch APs support this command.

Format

display radius-attribute [ name attribute-name | type { attribute-number1 | huawei attribute-number2 | microsoft attribute-number3 | dslforum attribute-number4 } ]

Parameters

Parameter

Description

Value

name attribute-name

Displays a specified RADIUS attribute.

The value is a string of 1 to 64 characters. After the name is entered, the system automatically associates the RADIUS attribute with the name.

type { attribute-number1 | huawei attribute-number2 | microsoft attribute-number3 | dslforum attribute-number4 }

Displays the RADIUS attribute of a specified type:
  • attribute-number1 specifies the standard attribute.
  • huawei attribute-number2 specifies a Huawei attribute.
  • microsoft attribute-number3 specifies a Microsoft attribute.
  • dslforum attribute-number4 specifies a Digital Subscriber Line Forum attribute.

The value of attribute-number1, attribute-number2, attribute-number3, or attribute-number4 is an integer that ranges from 1 to 2048.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Before connecting the device to a RADIUS server, run the display radius-attribute command to view the RADIUS attributes supported by the device.

Example

# Display the RADIUS attributes supported by the device.

<Huawei> display radius-attribute
  Codes: Auth(Authentication), Acct(Accounting)
         Req(Request), Accp(Accept), Rej(Reject)
         Resp(Response), COA(Change-of-Authorization)
         0(Can not exist in this packet)
         1(Can exist in this packet)
--------------------------------------------------------------------------------
Attribute                       Service    Auth Auth Auth Acct Acct COA COA
Name(Type)                       Type      Req  Accp Rej  Req  Resp Req Ack
--------------------------------------------------------------------------------
User-Name(1)                     All       1    0    0    1    0    1    1
User-Password(2)                 All       1    0    0    0    0    0    0
CHAP-Password(3)                 All       1    0    0    0    0    0    0
NAS-IP-Address(4)                All       1    0    0    1    0    1    1
NAS-Port(5)                      All       1    0    0    1    0    1    1
Service-Type(6)                  All       1    1    0    0    0    0    0
......
NOTE:

The preceding information is an example. The displayed attribute type depends on the actual situation.

Table 13-11  Description of the display radius-attribute command output

Item

Description

0(Can not exist in this packet) Attribute not supported in packets.
1(Can exist in this packet) Attribute supported in packets.

Attribute Name(Type)

Attribute name and type.

Service Type

Protocol type of the attribute.

Auth Req

Authentication request packet.

Auth Accp

Authentication accept packet.

Auth Rej

Authentication reject packet.

Acct Req

Accounting request packet.

Acct Resp

Accounting response packet.

COA Req

Change of Authorization (COA) request packet.

COA Ack

COA acknowledgement packet.

# Display the RADIUS attribute numbered 2.

<Huawei> display radius-attribute type 2
 Radius Attribute Type        : 2
 Radius Attribute Name        : User-Password
 Radius Attribute Description : This Attribute indicates the password of the user to be authenticated. Only valid for the PAP authentication.
 Supported Packets            : Auth Request  
Table 13-12  Description of the display radius-attribute type command output

Item

Description

Radius Attribute Type

Type of the RADIUS attribute.

Radius Attribute Name

Name of the RADIUS attribute.

Radius Attribute Description

Description of the RADIUS attribute.

Supported Packets

Packets that support the RADIUS attribute.

Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 90668

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next