No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset trace instance

reset trace instance

Function

The reset trace instance command clears all the diagnosis instances on a device.

Format

reset trace instance

Parameters

None

Views

System view

Default Level

3: Management level

Usage Guidelines

After service diagnosis is enabled and a diagnosis object is created on a device, the device creates a diagnosis instance when a user matching the attributes of the diagnosis object gets online. If the device diagnoses services of multiple users, it creates a diagnosis instance for each user, which occupies a large amount of system resources. Therefore, the device needs to delete the diagnosis instance of a user when the user goes online successfully or fails to go online. Additionally, the device provides an aging mechanism for service diagnosis. When the aging time is reached, the device automatically deletes diagnosis instances to reclaim resources.

In addition to the preceding two methods for automatically clearing diagnosis instances, you can run the reset trace instance command to clear all the diagnosis instances.

After all the diagnosis instances are cleared using the reset trace instance command, properly running diagnosis instances are also deleted. Exercise caution when you run the reset trace instance command.

Example

# Clear all diagnosis instances on the device.

<Huawei> system-view
[Huawei] reset trace instance
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 150953

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next