No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display users

display users


The display users command displays login information for each user interface.


display users [ all ]


Parameter Description Value
all Displays information about all users who log in to the device through user interfaces, including information about user interfaces that are not used. If the all parameter is not used, the command displays only information about user interfaces that have been connected. -


All views

Default Level

3: Management level

Usage Guidelines

You can run this command to view information about users who are connected to the device. The information includes the user name, IP address, and authentication and authorization information.


Lower-level users cannot gain access to information about users of higher levels.


# Run the display users command to view information about users who log in to the device through the user interface.

<Huawei> display users
  User-Intf    Delay    Type   Network Address     AuthenStatus    AuthorcmdFlag
+ 5   VTY 0   00:00:00  TEL              pass                   
  Username : admin                                                              
Network Address :
Table 2-5  Description of the display users command output




Terminal line in use.


The number in the first column indicates the absolute number of the user interface, and the number in the second column indicates the relative number of the user interface.


Interval from the user's latest input to the current time, in seconds.


Connection type.
  • Console
  • Telnet
  • SSH
  • Web

Network Address

Indicates the initial connection location.


User name for logging in to the device. If the user name is not specified, Unspecified is displayed.


Whether the authentication succeeds.


Command line authorization status.

Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 133476

Downloads: 106

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next