No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
passive

passive

Function

The passive command sets the data transmission mode to passive.

The undo passive command sets the data transmission mode to active.

By default, the data transmission mode is active.

Format

passive

undo passive

Parameters

None

Views

FTP client view

Default Level

3: Management level

Usage Guidelines

The device supports the active and passive data transmission modes. In active mode, the server initiates a connection request, and the client and server need to enable and monitor a port to establish a connection. In passive mode, the client initiates a connection request, and only the server needs to monitor the corresponding port. This command is used together with the firewall function. When the client is configured with the firewall function, FTP connections are restricted between internal clients and external FTP servers if the FTP transmission mode is active. If the FTP transmission mode is passive, FTP connections between internal clients and external FTP servers are not restricted.

Example

# Set the data transmission mode to passive.

<Huawei> ftp 10.137.217.201
Trying 10.137.217.201 ...
Press CTRL+K to abort
Connected to 10.137.217.201.
220 FTP service ready.
User(10.137.217.201:(none)):huawei
331 Password required for huawei.
Enter password:
230 User logged in. 
[Huawei-ftp] passive
Info: Succeeded in switching passive on.
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 93119

Downloads: 66

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next