No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap-sysname-info

display ap-sysname-info


The display ap-sysname-info command displays AP system names.


display ap-sysname-info




All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check currently-valid AP system names and AP system names that become valid after AP restart.


# Display AP system names.
<Huawei> system-view
[Huawei] ap-sysname ap-123456
[Huawei] display ap-sysname-info
Active name        : Huawei
Reboot active name : ap-123456
Table 7-2  Description of the display ap-sysname-info command output
Item Description
Active name Currently-valid AP system names.
Reboot active name AP system names that become valid after AP restart.
Related Topics
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 153255

Downloads: 125

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next