No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FITAP V200R010C00 Command Reference

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display interface description

display interface description

Function

The display interface description command displays the description of an interface.

Format

display interface description [ interface-type [ interface-number ] ]

Parameters

Parameter

Description

Value

interface-type [ interface-number ]

Displays the description of a specified interface.

If an interface type is specified but no interface number is specified, the description of all interfaces of the specified type is displayed.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display interface command can also display the description of an interface. To quickly view the description of an interface, you are advised to use the display interface description command.

If no interface type is specified, the description of all interfaces is displayed. If an interface type is specified but no interface number is specified, the description of all interfaces of the specified type is displayed.

Example

# Display the description of GE0/0/1.

<Huawei> display interface description gigabitethernet 0/0/1
PHY: Physical                                                                   
*down: administratively down                                                    
(l): loopback                                                                   
(s): spoofing                                                                   
(e): ETHOAM down                                                                
(d): Dampening Suppressed                                                       
Interface                     PHY     Protocol Description                      
GE0/0/1                       down    down     lineate-port-0
Table 5-4  Description of the display interface description command output

Item

Description

Interface

Type and number of an interface.

PHY

Physical status of an interface:
  • up: indicates that the interface is working properly.
  • down: indicates that the physical layer of the interface fails.
  • *down: Administratively Down, indicating that the administrator has run the shutdown command on the interface.
  • (l): indicates that the loopback function is enabled on the interface.

Protocol

Link layer protocol status of the interface:
  • up: indicates that the interface is working properly.
  • down: indicates that the link layer protocol of the interface fails.
  • (l): indicates that the loopback function is enabled on the interface.
  • (s): indicates that the spoofing function is enabled on the interface.
  • (e): indicates that the link layer of the interface is in EFM Down state.
  • (d): indicates that the protocol module of the interface is suppressed.
  • --: indicates that the link layer protocol status of the interface is not obtained.

Description

Interface description.

Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100064353

Views: 88829

Downloads: 61

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next